.: August 2009

Baja Organik Wazahqah

Penghasilan Dari Penggunaan Baja Organik Wazahqah Serbaguna.

100% baja organik hasil dari proses pengkomposan cacing tanah.
Menyemburkan tanaman dan merawat memulihkan tanah secara semula jadi (mesra alam).
Mengandungi pelbagai hormon & enzin yang keluar dari perut cacing.
Tiada TOKSID.
Kaya dengan Nutrien & Mineral.
Kaya dengan bakteria % mikrobe.
Menyembur / memulihkan tanah
Menambah micro nutrien tanah.
Menghindar serangga perosak.
Meningkat daya tahan penyakit.
Pelembab tanah.
Merupakan baja asli 100%.
Tiada berbau & agen pelenyap bau.
Sesuai untuk semua jenis tanaman dan tumbuhan.

PANDUAN PENGGUNAAN BAJA

Boleh dicampur dengan lain-laian tanah seperti semaian dan baja organik yan lain.

Ditabur kedalam air dalam ratio 1:3 rendam semalaman kacau dan tanpa dengan kain dan sembur ke daun / batang pokok atau di atas permukaan tanah dan rumput.

Dibuat uncang kain dan diletak diatas media (Arang/Sabut) untuk pokok jenis orkid.

Untuk kelapa sawit semburkan pada batang pokok hingga basah atau taburkan baja pada akar muda pokok.

Untuk tanaman padi semburkan pada batas atau taburkan baja diatas batas padi.

CONTACT PERSON

Thank you for visiting our website.
For more information please contact:

Mr. Nordin bin Mohamad
Managing Director
(H/P : 019-6211762)

Address:

No. 2, Taman Malim Jaya, Seksyen 1, 75250 - Melaka.
or
No. 36-1, Jalan CP 1/6, Taman Cheng Perdana 1, 75250 - Melaka.
or
No. 168, Taman Jati, 09000 - Kulim, Kedah.

Phone Number: 06-335 5742
Fax No: 06-336 0621.

Website Address :
http://www.wazahqah2009.blogspot.com/

SUPPLY ANY TYPES OF PAINT

We also supplier for any types of paint such as water based, thinner based, road marking and etc.

Nippon 300 High Temperature Finish & Thinner OP1

RECOGNITION AGENT BY NIPPON COMPANY

We are supplier Nippon paint product. Specialize on High temperatures types. Nippon 300 High Temperature FinishColor types: Green, Aluminum, Red and etc. Suitable for: Boiler, Oven, Plant incinerator, hot piping and etc.

Introduction:

Nippon Paint 300 High Temperature Finish is a silicone based coating which can withstand continuous temperature up to 1000 degree Celsius. Nippon 300 provides excellent protection for exhaust manifolds furnaces, boiler, chimneys and other installations exposed to extreme temperatures.Physical Characteristics of paintColor: Green, Aluminum, Red and limited color range.Texture: Aluminum - metallic aluminum lusterSpecific Gravity: 0.98~ 1.35, depending on color.Volume Solid: 40%

Recommendation for use:

Nippon 300 High Temperature Finish would not normally be applied directly to steel surface and would only be consider where corrosion problems were insignificant but decoration important. The surface should be free of rust, grease, oil and other contaminants. It should be wire brushed to minimum St 3 Swedish Standard SIS 05 5900. Priming with Nippon Inorganic Zinc Coating to thickness of 25 ~ 50 microns dry film thickness is recommended.Recommended Film: 20 ~ 30 microns for dry filmThickness per coat : 50 ~ 75 microns for wet filmTheoretical Coverage at recommended film thickness : 20m2/litre (for dry film thickness of 20 microns)13.3m 2/litre (for dry film thickness of 30 microns)Application methods : Brush, roller and compressed air spray.

Thinner OP1 Chemical Formula:

MixtureChemical Family:

Aromatic Hydrocarbon (Flam)

ThinningReady for use after thorough stirring. Where thinning is necessary for improving workability, use about 5% thinner by volume for application by brush and roller and 10 ~ 15% for application by compressed air spray.

Drying time at 25 to 30 degree Celsius: dry to touch 1/2 hour.

Standard Packing: 5 liter.

PLASTIC PRODUCTS

PLASTIC CONTAINER

All products above suitable for chemical heats.

UHMW SQUEEZE TYPES

Available to handle composite materials such as Prepreg Carbon, fiberglass, Kevlar and etc.

No contaminate directly to the materials.

CHEMICAL CONTAINERS

Suitable for resin mixer dispenser.

Heavy duty usage and not easy melt with chemicals heats.

SQUEEZE PLASTIC BOTTLE

It's suitable to keep Thinner, Acetone and any Chemicals Liquid.

Very easy handling and friendly usage.

KNIFE & BLADES

We are specializing to supply any kinds of blade. Normal and custom types.

MULTI PURPOSE GLOVE

LATEX GLOVES

Types:

1. Powder 2. Non-powder 3. Chlorination (smoothly inside and antiseptics).

Sizing: Small, Medium and Large

Suitable handling lab equipments, resin based materials, composite materials and etc.

White color (cotton type):

Used for workshop and engineering & construction activities.

Yellow color: Chemicals materials handling. (Lab)

SUPPLY ENGINEERING PRODUCT

Metal Roller and Squeegee / Spatula for wet lay up and dry lay up process ( Composite Manufacturing)

Dismantle Engineering Knife
Used for breaking thicker glass at Aircraft (cockpit area)

UHMW 1000 & PE Rod Materials type for Sweeper (Prepreg Materials).
Roller (Composite Bagging process)
Used for breaking thicker glass at Aircraft (cockpit area)